Contribute  :  Calendar  :  Advanced Search  :  Site Statistics  :  Directory  :  About  :  Cartoons  :  Web Resources  :  Polls ...for all that other stuff    
 Welcome to
 Monday, March 25 2019 @ 10:36 CET

rxem - CF card to RXV11 interface

Newsrxem is a disk drive for a pdp-11 computer. The drive uses modern storage (CF card).

The interface is the same as a RX01 drive, but its not software compatible.
32768 blocks of 512 bytes (16 meg)
Transfer is 512 byte blocks (not 128)
No interleave, no track skew

Included is a modified DX driver called SD (for Solidstate Disk) That has been tested with RT-11 V5.03.

The Idea for this project came from RX11emu By Peter McCollum. His project used a custom board in the PDP-11. and ran on a PC. I use a standard RXV11 interface. (or RX11 but I can't test that) and runs on a small PC board using a ATmega32 AVR processor.


What's Related

Story Options

rxem - CF card to RXV11 interface | 1 comments | Create New Account
The following comments are owned by whomever posted them. This site is not responsible for what they say.
rxem - CF card to RXV11 interface
Authored by: tingo on Tuesday, May 15 2018 @ 23:22 CEST
Waybacjk machine link to RX11Vemu.
 Copyright © 2019
 All trademarks and copyrights on this page are owned by their respective owners.
Powered By Geeklog 
Created this page in 0.03 seconds