Tuesday, October 10 2017 @ 12:44 CEST

Contributed by: tingo

KS10FPGA - the goal of this project is to re-implement the DEC KS10 using modern components and technology. This project retains microcode compatibility with the original DEC KS10 in order to maximize the probability that this design will behave exactly like the original DEC KS10 implementation.

The entire KS10 Central Processing Unit (CPU) is implemented in a single Field Programmable Gate Array (FPGA) instead using of boards of discrete logic. The FPGA is firmware is written in Verilog and currently consists of about 33,000 lines of code plus comments. Similarly, the Console Processor is implemented in a single-chip ARM Cortex M3 microcontroller whereas the DEC KS10 used an Intel 8080 microprocessor and a board full of logic. All of the software is hosted on top of the SafeRTOS real time operating system (RTOS) which is embedded in the microcontroller ROM by the manufacturer. The console software is written in a mixture of C and C++ and is about 20,000 lines of code plus comments (excluding the lwIP TCP/IP stack and SafeRTOS).

The KS10 FPGA peripherals are significantly different than the legacy DEC KS10 peripherals. Modern peripherals like Secure Digital High-Capacity (SDHC) solid-state disk drives replace the Moving Head RP06 disk drives and TU45 9-track magtape drives. Even though the physical devices are different, the original hardware interfaces have been retained. The disk drives use the same bits-on-disk formatting as the SIMH simulator so that files and disk images may be moved between SIMH and the target hardware without modification. Universal Serial Bus (USB) and Ethernet devices are provided in addition to standard legacy RS-232 devices.